Self Level Cement Malaysia
Aathaworld Sdn Bhd, a self level cement supplier and contractor Malaysia, covering KL Kuala Lumpur, Selangor, Klang Valley and other states. We aim to provide best self leveling cement supply and self leveling cement installation in Malaysia, trust us as a leading self level compound supplier and self level compound applicator in Malaysia. Today we would like to share why as a self leveling contractor in Malaysia, we always recommend you to use self level concrete flooring and how self leveling cement works.
What is Self-Leveling Cement
Self-leveling concrete is polymer-modified cement that has high flow characteristics and, in contrast to traditional concrete, does not require the addition of excessive amounts of water for placement, this is the advantage of buying this innovative cement from self-leveling cement compound supplier in Malaysia.
Our self leveling cement is self-smoothing, free flowing material, made by pre-blended compound consists of designated cements, hard wearing aggregates improved with exceptional polymers and flow agents.
Why Self-Leveling Cement
Our water-based modified light-duty self smoothing modified topping, designed for use as a thin topping at thickness of 2 - 10mm. It makes old and new concrete floors smooth, dense and ready for finishing. After applied, self level flooring contractor Malaysia may apply another top coat with full range of our industrial finishes or other flooring finishes.
Our good service as a self level cement contractor in Malaysia will provide good adhesion on concrete and cement-based screed, seamless, monolithic application, quick and easy application by hand with rapid-cure so you have minimum downtime for your production, commercial and plant operations.
Good self level concrete applicator in Malaysia will give you best and less headache without worry the next layer of overlayment have uneven flooring troubles, it can be solved with good self level compound system supply and installer.
Benefits of Self-Level Compound
As a self leveling cement supplier in Malaysia, we will definitely tell you that there are so many advantages if you opt us for your self level floor contractor. Self leveling compound installer can use the leveling compound very easily even without professional applicator. Since it does not require additional elements to be mixed in, also no special tools required for this self level cementitious.
Furthermore, it is also a fast drying self leveling cement which it requires minimum drying time for indoor where ventilation is moderate, normally can be used completely after 24 hours. Breathable and smooth surface will be created without further finishes, user can also disregard the worry of air pockets and bubbles trapped within the concrete, the water can be evaporated since this polymer modified leveling flooring cementitious is flexible and highly resistant to moisture after applied.
It also provides a high compressive strength which can be the overlayment or so called final floor surface, as well as underlayment sub floors. Self level cement contractor in Malaysia commonly use our self level system supplies as their secondary flooring system, and install another layer of timber flooring, ceramic tiles, carpets or vinyl flooring on it.
Self leveling system supplier in Malaysia like us also able to recommend you a high quality self level concrete with heat emission function with lower down heat vapour stuck in between cementitious and existing concrete floor.
As a quality self leveling concrete supplier in Malaysia, we are also able to provide you overall cost savings either you do-it-yourself (DIY) or hire us as self level contractor to carry out your flooring requirement. Our self level cement is resistant to oil, water; however, if continuous contact with water is expected or if attack from organic solvents, organic or inorganic acid is likely, the surface should be protected by a suitable resin based coating.
Where to Apply Self Level Flooring
Our self-leveling cementitious, self-smoothing floor topping designed and highly suitable for both light and heavy duty usage, wide variety of floor finishes, eg carpets, vinyl sheeting, tiles, and industrial floor finishes (urethane and epoxy coatings), and toppings. Suitable for new construction and refurbishment projects, residential, commercial and even industrial such as warehouses and factories’ floors where strength and durability are of high priority on immediate basis.