Aathaworld Sdn Bhd is a protective coating supplier and contractor Malaysia, cover KL Kuala Lumpur, Selangor, Klang Valley and other states. We can cover coating from wall, floor, roofing, façade, industrial equipment, infrastructure to many other components in construction industry. Coating application is to cover an object’s surface that is addressed as substrate. Coating can be used for several purposes, it includes functional coating, decorative coating as well as both functions. Protective coating supplier in Malaysia claims that, not the whole piece of substrate needs to be covered completely and multiple coating types can happen in a single object. Putting all these on a layman example is the drinking bottle where one or few sides have decorative coatings printed with picture and words while another side has full-functional coating, meaning to say the adhesive coating can be just a part of the substrate. For instance, lacquers and paints are two of the coatings that have at least two features; including anti-corrosion paint, decorative paintings and so on. Industrial equipment such as pipes, tanks and so on require coating so they can be more durable, it can be done by protective coating contractor in Malaysia through proper specification made.
Functional Coatings
There are several functional coatings can be applied in order to alter the substrate’s surface properties, including wear and tear resistance, corrosion resistance, adhesion, abrasion resistance, anti-skid and wettability. Another realistic example is the semiconductor device, can be fabricated with wafer as the substrate and coating layer will make it to be magnetic-responsive, electrical-conductive and more. Thickness is a key to coating and many protective coating supplier Malaysia impose strict control on all these, it involves many processes in order to reach this control, from wall painting using brush or investing in machinery to do coating application in all these electronics industry. Especially when “non-all-over” coatings were to be applied, it requires more attention and processes. Coating can include solid, gases and liquid in both the construction and industrial sectors, it is all depends on the usage. Protective coating contractor Malaysia does able to provide many customized solutions to many users in the industry. For instance, anti-slip coating is required for hospital common area. Anti-skid coatings need consistent specifying in areas such as toilets, paving as well as general area to make sure safety of traffic are there.
Anti Slip Flooring Treatment Chemical Malaysia
Anti slip or anti skid coating and paint are very essential in Malaysia, as this is a nation which has most rainy days in a year, this is especially in KL Kuala Lumpur, Selangor, Klang Valley and other states of Malaysia. Slip and fall accidents are increasing dramatically nowadays in Malaysia, indoor and outdoor floor area may always stay wet and cause it to be slippery. Therefore, according to protective coating supplier in Malaysia, it is important to apply the anti-slippery chemical on floor in Malaysia. Some of the slip proof chemical is also effective under wet and dry conditions, can be applied internally and externally. It is also transparent and invisible which can maintain your flooring appearance, normally it can last for minimum of 5 years or more. Some even use for rejuvenates worn tiles and old tiles, kill bacteria and prevent their regrowth, some family also apply to prevent their children to fall down due to skid. Protective coating contractor in Malaysia will also guarantee some period of warranty in order to increase the confidence of architect, engineer, owner.
There are several organic coatings can be used to protect pipeline against passive external corrosion, active corrosion protection such as cathodic protection is also being supplemented with the organic type. Depending on multiple aspects consideration, it will determine the selection of which coating system option will be used. Protective coating supplier Malaysia will normally put into account concerns such as compatibility with cathodic protection, operating temperature, soil characteristics, level of external stress need to withstand. Few properties that are critical in the coating system, the first one should be defect-free protective coating shall be there within a time frame under the practical limitations including fluctuating temperatures. Coating should have certain tolerance level to deal with in service deterioration, field bending and convenient to handle during construction. Protective coating contractor Malaysia understands properties of awesome coating system must meet numerous criteria in order to deliver the best performing pipes to customer. Coating has more or less involve detailed calculation where other outsiders cannot jump into this industry.
Carpenter always wish to get some reputable brands from these coating chemical specialist, besides enhancing the desired economic value of these furniture, it helps too in many other aspects. It can assist in resistance towards to moisture, environmental agents, insect-resistant and more. In addition, protective coating supplier in Malaysia mentions that those finishing surface will able to make the wood cleaning much easier compared to others that are not treated. It can also help in sanitization, pores-sealing that might breed bacteria. Pores were those holes that if no sealing materials to be filled, it will be prone to promote the growth of fungus due to water has the place to rest on. Of course, wood can have other usages such as flooring hardness, musical instrument and so forth. Another common selling point by protective coating contractor in Malaysia is that good timber finishing material can enhance the wood that has minimal value to gain more value, from double, triple to any multiple times in compared to its original organic value. However, it is also subjecting to the applicator, wood species, wood supply and the demand. Carpenter always pay high attention on all these because it will improve the margin and salability of their hard-made products.
Where to Get Protective Coating Chemical and Get Contractor in Malaysia
Aathaworld Sdn Bhd supply and install (apply) multiple cost saving coating material or other chemicals can be used for general purpose, pipeline, interior and exterior, residential and commercial, indoor and outdoor, light and heavy industrial usage, customizable specification. As protective coating supplier, installer (contractor, applicator) in Malaysia, we are able to provide a full service consultancy, customize manufacturing, supply and apply for your project covering new, repair, refurbishment and renovation projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; of course, also we are able to be heavy duty coating supplier and industrial coating contractor for other countries in Southeast Asia (SEA) such as Singapore, Cambodia, Vietnam, Laos, Myanmar (Burma), Thailand, Indonesia, Philippines, Brunei.
Submit your protective coating materials projects sourcing requirements (supply and install), either you are looking for a supplier or contractor for new or existing pipe coating, pipe rectification or resurface in KL Kuala Lumpur, Selangor or other states in Malaysia. Submit your enquiry to us today at info@aathaworld.com or call (whatsapp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).
Photo credit: oilandgasmiddleeast, edwaypainting, americanindustrialsystems, chungwo, eastcoastprotectivecoating, protectiveindustrialpolymers
