Tank Lining Contractor | Surface Treatment Malaysia

July 21, 2020

Tank lining is a surface treatment method applied on commercial and industrial fabricated tanks in order to achieve certain purposes or multiple functions. However, it can also be done on residential containers, functional vessels, pipes and other equipment in various sectors. Storage tank is a container constructed for the storing of water, chemical, oil and gas that can be presented in a wide range of designs, patterns, vertical, horizontal, shapes and sizes. Tank lining contractor in Malaysia says that raw materials that can be used to build these tanks include fibreglass, plastic, stone, steel and concrete. Some examples of storage tanks are Water Storage Tanks, Sulfuric Acid Tanks, Fuel tank, Diesel Storage Tanks, Sodium Hydroxide Storage Tank, Fish Tank (also known as Aquarium), Rotating Tank, Isolation Tank, Above Ground Fuel Tanks, Sodium Hypochlorite Storage Tanks, Rainwater Tank, Above Ground Storage Tanks, Fixed Roof Tank, External Floating Roof Tanks,  Irrigation Tank, Ballast Tank, Reservoir Tank, Industrial Chemical Storage Tanks, Scuba Tank, Pressure Vessel (or Pressure Tank), Live Stock Tank, Temple Tank, Chemical storage Tanks, Underground Storage Tanks, Field Erected Tanks, Drop Tank (use in aviation), Fiberglass Oil Tanks, Dunk Tank, Fiberglass, Septic Tanks, Tanks for peracetic acid, natural gas and many more. 

Tanks are without doubt the essential constructed equipments in many operating plants and factories, the substitutability of this product is nearly impossible since its functions can be varied from purely storing of raw materials input to goods that are in WIP (Work-in-Progress) status as well as the end product which is ready to be sold. Tank used to store water is simply known as a water tank and it is the most common item to be seen everywhere, from everyone owns one at a residential home, commercial shoplot’s tank of rainwater or backup source to industrial processing plant. Tank lining contractor Malaysia suggested the material used for water storing shall be made by food-grade, BPA-free and polyethylene plastic is assuredly a good choice. PE Tank is superior in terms of cost of acquisition, maintenance and safety for this usage of water tank, despite of there are still many tanks available manufactured by materials including concrete or metal. Research has shown that PE has the highest popularity among all other plastics globally, its simplicity and versatility are selling points compared to other ranges of commercial polymers. Even grocery bags, toys for kids, vests for bulletproof, laundry detergent bottles, caps, house appliances, milk containers and more. Its resistance against chemical, water absorption entitles itself to be safe in use for many food and beverage packaging.

The lining solution offered by tank lining contractor in Malaysia can make the tank contain chemical, gas and other kinds of liquids to be safer in its application. The thick film that is robust helps to carry out functions such as prevention of corrosion, leakages and chemical contamination. Linears made by various materials can originate from light or heavy-duty properties. In fact, many industry codes of operation require plant owners to do proper coating, lining their tanks for the sake of a safe working environment to workers. There are a wide common range of lining materials used by fabricators as finishing to protect the surfaces, including stainless steel, epoxy, fibreglass, polyurea, vinyl ester, polyurethane and cementitious. Tank lining contractor Malaysia who has experience in each of these materials respectively can do refurbishment, upgrading, repair and maintenance in addition to wholly new tanks, pipes and other equipment. Stainless steel lining is considered a good option for sealing up the tank to tightness of water, and can be finished up with rough or polished surfaces. The name itself has already carried out the meaning of “stain-less”, indirectly it has the ability to resist against any potential stain through that invisible coating. This is the iron alloy mixed with other elements such as manganese, carbon, silicon, nickel, chromium and nitrogen. In addition to stain resistance, corrosive-resistance is also its feature since chromium oxide layer will be formed when oxygen is in touch with additive Cr the hard, steely-grey, brittle transition and lustrous metal. Tank lining contractor in Malaysia says that 10.5 percent to approximately 18 percent of chromium will be acting as a hardening performer to steel. 

Epoxy lining is alternative materials for pipe and tank surface treatment, it can be applied when repairing is required to be carried out. Due to the wide range of capabilities this material is equipped with, it is very expensive too, at least when compared to ordinary resin. Heavy duty flooring chooses and uses up a lot of epoxy because it really can do the miracle compared to other finishes regardless of the applications. Tank lining contractor Malaysia claims that epoxy coating to floorings of many households can be as durable as up to three decades, commercial and industrial usages will be subjective to other factors such as traffic heaviness, accidents, spills, temperatures and other circumstances. However, wear and tear resistance of epoxy is still one of leading in the resin finishings. Additionally, epoxy resin is also having properties such as superior adhesiveness due to its attractive forces in between substrate and epoxy coat. At the same time, epoxy lining to pipe and tank can be finished at semi-gloss, matt, glossy and it is a super performer in many acidic, alkali chemical resistance as well as external intrusion such as moisture and scratch. Tank lining contractor in Malaysia is also applying epoxy lining to many equipment that need to be operating under water, high temperature and pressure.

 

Fibreglass, FRP (Fiberglass Reinforced Plastics), GRP (Glass Reinforced Plastic) these lining methods can be interchangeable (at least from the name itself) since they are more or less providing identical properties. This is a coating system with fibreglass reinforcement, strengthening the structural surface while existing cracks will not affect its durability. There are a lot more finished goods in the construction materials line that use fibreglass lining, such as pool for swimming, grating, ladder and pipes. Water tank lining contractor Malaysia is able to provide leak-proof, smooth finish, seamless FRP or GRP lining that has low maintenance requirement while it has the also reduced probability of discolouring and fading compared to other materials. There is also spray-based polyurea tank lining but it is not as popular as polyurethane that is highly suitable for concrete based tank, while both of them are sharing the similar features such as flexibility and strengthen elongation that allow them to be resistance to abrasion, fast setting, UV resistance, waterproof, anti-corrosion and impact resistant. Its waterproof feature makes them common to be applied on roofing, slabs, walls, piping in addition to tanks. Two component polyurea coating materials that derive from amine resin and isocyanate can last the concrete or surface up to thirty years.