top of page

Pillar Supplier Malaysia | Column & Structure


Pillar Malaysia

Pillar has many kinds of materials such as metal, wood, stone or concrete and these are applied as the vertical structure to support the building, monument or ornament. Pillars can be made from many more materials but these key elements shall vary between metal, wood, stone, steel, iron, concrete, timber, brick, and block that is basically having good strength in terms of compressibility. Pillar supplier in Malaysia can do precast or cast-in-situ columns if the pillars were intended to be built by reinforced concrete. Constructed up to units of a single piece of material might also affect the overall integrity or shape in cross-section, it requires precise engineering calculation by professionals to ensure safety level. For instance, stone or timber is suitable to be applied as a single piece while bricks are typically the other way round for such construction. A pillar should be having a stabilizing function or at least a load-bearing feature although many architects are specifying more commemorative pillars to beautify the whole project, a stand-alone pillar that is very attractive to look at. There are styles that were made up through the Greek era, called Corinthian, Ionic and Doric which are still being well accepted by the public according to pillar supplier Malaysia which does have years of experience.

Steel Pillar Malaysia

In the perspective of structural engineering, pillars are supporting heavy loads above them, sitting under beams or arches on which ceilings or walls rest. Pillar does the transmission of the structures’ weights above it to any other structures underneath it through the theory of compression. There are three major columns that are in classical orders that we have mentioned, Doric, Ionic, and Corinthian while these are the best description of those forms and decorations during Greek and subsequently, the Roman Columns. Pillar supplier in Malaysia does claim that these are still very famous and widely used in the world of architectural and structural engineering. Doric has the shortest and yet simplest order, it is not inclusive of the decorative foot, vertical fluting and flared capital. When we discuss whether a column that is rectangular or square is better, we usually mean which has the least effort to build, lesser time, reduced manpower requirement, lower material usage and most importantly, the cost. These two are being carried out for comparison against others because they are much simpler to be constructed and cast, in the comparison with circular ones, because of the shuttering ease and easier to support them from collapsing that might be caused by pressure (normally occur when concrete is still in the form of “flowable”).

Pillar Supplier Malaysia

If wood will be utilized as a pillar or column, rectangular or square one will also be applied while the type will be ranged from yellow pine for pain-grade or cost economical purposes while hardwood such as white oak, red oak, mahogany, birches for higher-end. Pillar supplier Malaysia does advise that because flare sides of the column shape do not support load structurally, therefore, the cylindrical-shaped column will be the strongest since its corners provide such strength. We see most of the pillars are made of concrete because they are really tough, conventional columns made of concrete, or even its concrete wall will have three thousand to five thousand psi. The brick column is a very strong structural component that mainly functions as the prime load-bearing element, in a structure of masonry while the erection of brick columns on top of concrete columns will technically enhance the beauty of the building architecturally. Internal column or pillar can be manufactured by either FRP (fibre reinforced polymer), fibreglass, durable plastic or wood, either round or square, plain, panelled, fluted, shorter or taller and the style can be as decorative as required by the building owner.

Wooden Pillar Malaysia

Where to Get Column and Pillar Material in Malaysia

Aathaworld Sdn Bhd design, supply, apply or install multiple innovative pillar, wall, column, beam material, decorative component or architecture solutions that can be used for your project, building, commercial and residential units. As a wall column, beam, pillar materials or panel system distributor, trading house, customizer, contractor and the installer in Malaysia, we are able to provide a full-service with advice from design, customize manufacturing, supply and install (or apply) for your project inclusive of new, repair, refurbishment, upgrading, replacement, maintenance and renovation projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; of course, also we are able to be decorative wall panel or wall finishes, interior and exterior for column, pillar supplier and contractor for other countries in Southeast Asia (SEA) countries such as Singapore, Myanmar (Burma), Cambodia, Vietnam, Laos, Thailand, Indonesia, Philippines, Brunei, Bangladesh as well as China, Taiwan, Hong Kong, Australia and New Zealand. Check with us for your beam, pillar, column, wall panel or other finishing system service for your project in Malaysia and other regions today at info@aathaworld.com or call (WhatsApp) at +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).

Building Pillars Malaysia

Photo credit: Media from Wix, archiexpo, history1msb,


Comentários


Recent Posts
View by category
Search By Tags
bottom of page