Aathaworld can supply latex as admixtures for cement mortar and bonding agent that can enhance the water resistance, bonding ability and flexibility. It can assist in cement mortar matrix strengthening. Latex can be used in plastering, screeding products, tile adhesive, bonding agent, repair mortar, masonry mortars, thin layer patching mortars, abrasion resistant linings, and more. Latex supplier Malaysia says that the purposes of using latex in all these products are to improve chemical resistance besides water, abrasion resistance, strengthen the adhesion, reduce the shrinkage probability, enhance non-corrosive ability, make the subject more flexible, workability and overall performance. Many of the latex products manufactured by specialist in Malaysia is also known as synthetic polymer emulsion for cement mortars. Their end products are usually environmentally-friendly with low VOC (Volatile Organic Compounds), these substances are having high vapor pressure when it is presented at an ordinary room temperature, an organic material that is harmful because it might cause nausea, frequent headaches, throat irritation, nose and eye damages as well as to central nervous system. Liver and kidney failure might also be caused by this substance according to EPA (Environmental Protection Agency). There are several elements as examples of VOC are Ethanol, Terpenes, Carbon Disulfide, Acetone, Butanal, Benzene, Formaldehyde, Dichlorobenzene and more. Latex supplier in Malaysia says that even daily products such as wallpaper, furniture polishing chemical, glue, gasoline combustion, BBQ, candles burning, cigarettes and nail polishing remover might release these elements. Hence, the reduced level of VOC in latex making is important. Water resistance, durability of plastered wall, screeding lasts much longer, bonding between tiles and mortars and overall properties of the screeding are essential to be reinforced so that the excellent quality of work can be delivered to customers; therefore, contractors must choose wisely of these materials.
Bonding Agent and Binder
Bonding agent is a type of substance that can bind all materials to achieve cohesion or adhesion chemically and mechanically. In accordance to latex supplier Malaysia, binder can be presented or named as glue, thickening, adhesive and it is usually hardened by physical process by chemical, multiple particles, filler powder and bind fibres. For instance, masonry’s bond stones and timber framing’s tie beams are having mechanical binders. There are inorganic and organic types of binders, gypsum, cement, lime, liquid glass are inorganic while organic elements are including polymers, bitums, plant and animal glues. Depends on the main material’s nature, it can be either ceramic, metallic or polymeric. Binders can be further categorized into several classifications, from autoclavable which is comprising of calcium, silicon and oxygen, also known as Wollastonite Powder (Calcium Metasilicate); it will get hardened at approximately 170 celcius to 300 celcius, eight to sixteen atmospheric pressure. Latex supplier Malaysia also classifies based on the resistance to chemical, from hydraulic (hydraulic lime, portland cement, Roman cement) to non-hydraulic (magnesia, air-cements, hydrated lime and gypsum). Binders will carry out its chemical reaction when it goes through some elements exposure, polymer will have permanent effects such as physical alteration, melting and some will achieve it when it were to be exposed to moisture, light or air.
Cement Mortar and Concrete
There are several words that always being confused by non-construction players which are concrete, mortar and cement. Concrete is actually a product comprises of gravel, sand, cement and aggregates, aggregates that are divided into fine and coarse. Water is the additional element to activate the cement and key substance to do the binding of all the others to form the final solid product. Concrete can be applied as patio, slab, foundation, wall and other complete masonry structural materials, it can be as versatile as possible and it is all started from dry simple mixtures, to become semi-liquid and flexible materials that eventually form any other shape, mould and dries to as hard-rock that addressed as concrete. Latex supplier in Malaysia claims that there are other reinforcement materials such as reinforcing bar, wire mesh are metal to reinforce the concrete structure. The purpose is to minimize the solid concrete cracking chance and also strengthening the whole masonry unit. Of course, ready packaged of concrete mixes can be bought in any hardware shop, it is a combination of sand, gravel and cement where the additional element to be added before using it to do installation is the water. However, these kinds of ready-made bag is useful when contractors want to build for small projects, while ready-mix concrete that can be ordered from premix plant and delivered to the site is for the usage of large projects. Nevertheless, latex supplier Malaysia does supply to main contractors who wish to mix at the site for huge projects too.
Mortar is actually binding material when constructing the building using block, stone and brick; it is basically made of fine sand, lime and cement. Cement is whereas the fine binding powder that normally mixed with other products and form masonry unit by combining mortar and concrete as part of these components. Cement can also applied as adhesive, tile grout and stucco. Latex supplier in Malaysia for building materials installer states that mortar needs to be blended with water, lime and fine sands in order to enhance the product’s durability, acting as a glue to hold stone, concrete block, bricks, etc. Mortar’s water is an agent to make it to be hardened and cured but mortar is definitely not concrete and will not perform properties of a typical standalone concrete. Cement is manufactured of clay, shell, limestone as well as silica sand where these elements are all crushed and combined before heated up to 1500 celsius. Definitely other materials such as iron ore will be added into it prior to the heating and finally the clinker will be grounded to fine powder and ready-to use for other cementitious construction products.
Where to Buy Latex Bonding Agents, Admixtures and Construction Chemicals in Malaysia
Aathaworld able to offer consultancy during specification, inspection, repair, supply and apply, refurbish for all types of residential, commercial buildings, factory, shoplot, office, infrastructure, pool, fountain, roofing, home renovation, office refurbishment, metal, steel, aluminium, stainless or mild steel materials, as a latex supplier and contractor (applicator) in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; of course, we are also able to be latex supplier and construction chemical applicator for other countries in Southeast Asia (SEA) such as Singapore, Myanmar (Burma), Cambodia, Vietnam, Laos, Thailand, Indonesia, Philippines, Brunei, Bangladesh as well as China, Taiwan, Hong Kong, Australia and New Zealand. We are supplier for multiple construction chemicals products brand such as Mapei, Sika, Forsoc, Greenseal, Bostik, Pentens, BASF, Dritech and many more in Malaysia.
Submit your both latex, bonding agents, admixtures and other construction chemicals chemicals sourcing requirements (supply and apply), either you are looking for a supplier or contractor for construction, industrial usage, metal, new or existing building, upgrading, repair or renovation for ceiling, wall, floor slab or roof in KL Kuala Lumpur, Selangor or other states in Malaysia. Submit your industrial and construction chemicals sourcing requirements enquiry now to firstname.lastname@example.org or call (WhatsApp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holidays).
Photo credit: researchgate, resikon, weber, alfaihaengineering, dmvconcrete, sakrete, adhesivesmag, statsflash