top of page

Wooden Door Supplier and Contractor | Timber Specialist Malaysia

Sliding Wood Door Malaysia

Aathaworld is capable to supply and install wooden door, covering KL Selangor, Klang Valley and other states of Malaysia. There are more than two types of lumber, either rough-sawn or the surface on one to more faces. In addition to pulpwood, lumber in rough form is the furniture-making raw materials. Lumber can also be processed to plank and beam as structural purposes, its surfaces needed to be polished and treated with timber coating. There is another term for lumber in which it is called as wood. A door can be manufactured by multiple materials in addition to wooden door, including PVC, glass, steel, FRP, fibreglass and aluminium doors. In accordance with wooden door supplier in Malaysia, ledged and battened doors can be braced, framed in order to have better rigidity and appearance. Tongue and groove joints at 35mm thickness are vertical wooden batten of the door’s height, this type of door is always a common choice to doors of bathroom and toilets. A flush door is manufactured with MDF (Medium Density Fiberboard) and plywood with smooth finishes, the smoothness of this door is completely well-polished. It will then be fixed to the light wooden frame. Wooden door supplier Malaysia says that the cardboard core materials will be filled up the hollow core of the door. Door hinge will be attached to one side of the door and allow it to be opened in a single direction, its frame can be fabricated using steel or timber material. Flush doors are very popular due to its outstanding durability and appealing outlook, as well as the cost affordability.

Wood Supplier Malaysia

The steel door is another option for the builder to opt for, suitable to both interior and exterior designs. A hollow or solid door is good to be installed, frame made of steel is a strong substitute for the wood frame. An economical steel frame makes wooden door supplier in Malaysia able to complete the project at a competitive rate, even shutter produced by timber can also be installed with steel framing. A shutter can definitely be fabricated using mild steel with properly welded to the frame, made up of tee, angles, pressed steel plates and channels. Hinges and holdfasts will be welded onto the steel frame. Steel frame and the door can be stamped with textured wood grains and it is manufactured in precision engineering or cold rolled mild steel, with low maintenance costs and frequency required. Glass door is alternative option to timber one, and it can be fitted to the wooden frame. Wooden door supplier Malaysia claims that glass door is heavy, more costly in acquisition cost and regular maintenance. However, it is another top-ranked in the list of the architect when comes to majority of office designs. It offers unobstructed views to many rooms, from the meeting room, garden, office front door and more.

Glazed Wood Door Malaysia

Other doors and windows that are very popular in building construction are known as paneled or framed door, they usually made up of plywood, hard board, block board and timber. Wooden door supplier in Malaysia can actually coupled it with glass to make decorative purpose and at the same time achieving the cost savings for that project. Glazed or paneled door is the alternative name, in which some doors’ parts are presented in timber panel and the remaining is paneled with glass. Architect or interior designer might have more ideas to how to make it, with the assistance based on experienced timber door manufacturer, it will make the door aesthetically pleased in outlook while maximizing the technical know-how flexibility. PVC (Poly Vinyl Chloride) door is another alternative to wood based door, this kind of plastic materials make door more affordable in addition to the manufacturing of pipes, fittings, water tanks, other customization of products for both construction and engineering. Advantages of using this product makes wooden door supplier Malaysia concerns about the competitiveness since it can achieve anti-corrosion, termite resistant, moisture proof, lightweight and low maintenance over the long run. Besides that, it can also be presented in various designs and colours, making wonderful possibilities to architectural design of many users in the industries. Anyhow, there are some drawbacks of using PVC door, its lightweight feature making it not suitable as the door of entrance due to the reason, not completely waterproof as well as not friendly in terrible environmental situation. Steel door or wooden door might be more competitive in these conditions.

Fibreglass Door Malaysia

Wooden door contractor in Malaysia can also compare their timber based door to other kinds of doors, including fibreglass, FRP, PVC and aluminium doors. First of all, fibreglass is a very durable yet light, strong (having superior strength in terms of its tensile readings), non-flammable type of materials. It is originally derived from fibrous form and cloth-wovened. Resin bonded with glass fibres making it to be applicable for a wide range of products such as windows, bath tub, tank, facade and more. Fiberglass based products can have very low cost in maintenance, much lower than steel and timber. This hardened material is also having high stability, superior insulation after filled up with foam as well as it will not be twisted, bow or even warp. Wooden door contractor Malaysia says that with wooden panel installation to its surface, its improvement of aesthetic is never a doubt. Interior and exterior applications are both suitable to many architectural styles. Fiber Reinforced Plastic (FRP) is another term for fibrous glass reinforcing with the plastic base. PVC’s tensile strength is approximately ten times weaker than this material and this material can make the doors moulded in different shape, colour and thickness (of course, the standard door will have fire retardant feature at 30 to 35mm thickness). The wooden support will be used in handle, stopper, locks and other accessories fittings. The moulded leaves (normally is 1.5mm thickness of two leaves) on to the core material making a panelized sandwich design. Wooden door contractor in Malaysia has also been taken to compare with aluminium door specialist, where its material can make a lot of awesome products such as partition, ceiling, curtain wall and more. One advantage that aluminium door wins over wooden is that the termite-proof naturally versus the other one where coating is required. There are also other materials can make doors, such as bamboo, solid concrete door as well as tiled doors. However, those materials are not so common compared to those categories that we have mentioned.

Where to Get Aluminium Awning Supplier and Contractor in Malaysia

Wooden Door Malaysia

Aathaworld Sdn Bhd supply various types of wooden products such as door, frame, window, bench, cabinet, furniture, construction platforms, scaffolding, facade, decorative used for industrial, residential, commercial, construction, interior and exterior, engineering, oil and gas (O&G), marine, food and beverage, light and heavy industrial usage, decorative façade, customizable specification to make sure you have the best timber materials supply in Malaysia to fit your project requires including white oak, wooden pallet, yellow balau, kembang semangkok, meranti, dark red meranti, ash wood, walnut wood, red indian walnut wood, maple wood, hard maple, kempas wood, ksk semangkok, mdf board, mahogany, rough sawn wood, sapela, red balau, nyatoh, plywood, teak wood, europe oak, mixed wood, kasah wood, beech, oak, soft wood, pine (red and white pines), elm, fir, cedar, plain sawn, chengal, balau and many other types. Our fabricated wooden door is friendly to be customized by providing us your design and specification required. As wooden door supplier and wooden door contractor in Malaysia, we are able to provide you a consultancy, customized proposal and real execution works for your project covering new, repair, erection, refurbishment and renovation projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; in some circumstances, we are also able to be your wooden door supplier and installer for other countries in Southeast Asia (SEA) such as Singapore, Myanmar (Burma), Cambodia, Vietnam, Laos, Thailand, Indonesia, Philippines, Brunei, Bangladesh as well as China, Taiwan, Hong Kong, Australia and New Zealand.

Submit your wooden door and timber products sourcing requirements, either you are looking for a supplier or contractor for new or existing building, upgrading or renovation for all range of industries, building types in KL Kuala Lumpur, Selangor or other states in Malaysia. Submit your wooden door, awning, cladding, roofing, panel, furniture and more sourcing requirements enquiry now to or call (WhatsApp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holidays).

Wooden Door Supplier Malaysia

Photo credits: centennialwindows, decordesigntrends, hall-brothers, aliexpress, happho, globalwoodmarketsinfo


Recent Posts
View by category
Search By Tags
bottom of page