Aathaworld Sdn Bhd is able to provide manufacturing plant renovation, new or existing production plant, machineries maintenance work, covering KL Kuala Lumpur, Selangor, Klang Valley and other states of Malaysia. We aim to be leading plant contractor in Malaysia, that is why we promise to deliver best quality of production plant renovation work and machinery service in Malaysia. Manufacturing plant requires consistent upgrading work to ensure efficiency is maximized, including its production line and office renovation, the factory’s equipment and machinery maintenance. Enquire us today for your manufacturing plant maintenance contractor in Malaysia, from building to mechanical maintenance, repair and upgrading services.
Machineries and Equipment
There are wide range of machineries and equipment in Malaysia, equipment that are core to the production plant include the basic electric power generation, raw material preparation system, actual production line set, finishing and packing machineries in addition to warehousing and logistics set up.
Power Generating Set
Production plant contractor in Malaysia is able to service generator set, from the core or standby unit to plant or building, types are classified by diesel, gas or others. A plant must have sufficient and backup electricity setup, otherwise, it will cause decreased in production efficiency and it will have also a high opportunity cost in income-generating. For example, the manufacturing line will cease due to electricity supply shortage that make the customer’s order cannot be met; whenever contract cannot be satisfied, reputation, monetary penalty and customer switching cost will be occurred instantly. Manufacturing plant contractor in Malaysia claims that there is nothing more important than to optimize the efficiency of production in order to compete in local and global market that full of substitution. No factory owner is willing to see these happen, and therefore it is very crucial to appoint a trustable and quality contractor to do the service.
It is neither simple nor difficult to engage the right one in the market, because supply will always be there whenever the demand is there. Getting a production plant contractor Malaysia who can provide full design or consultancy, fabricate in a customization way, reverse engineering and efficiency boosting are important. Generator rental, lease, hire-purchase (first or second hand), direct procure, spare parts milling, maintenance to overhaul repair service, most of the suppliers can definitely cater for the requirement. Power equipment requires specialist to do the main service, but simple spare parts replacement or repair can be done by many general engineering firm. Manufacturing plant contractor Malaysia shall able to fabricate, assemble and supply power generating-set that most of the factories require. Power supply is key to every building, from industrial, residential, commercial to infrastructure too. Hence, every building or plant owner shall treat this matter seriously. Enquire today for your preferred production plant contractor in Malaysia.
Raw Material Preparation
This stage is very important in every plant because it get ready of all the raw material, input to be feed in to the pre-production (before any actual product making process happens). The silo that keep bulks of raw material, the automatic or manual kind of input feed-in system as well as one of the essential material handling conveyor system before shaping and actual production. Production plant contractor in Malaysia normally can also take care on this portion, their scope is including the storage tank or silo fabrication, some also recognize these as feedstock tank welding, assembly, installation. Material tank can be made up of different kind of materials, such as steel (can be mild steel, stainless etc), aluminium, HDPE, fibreglass or even clay tank. Normally, each of the factory owner has their own preference on the material used to produce these. However, the raw material nature must match the properties of that product content requirement, but normally manufacturing plant contractor in Malaysia can advise accordingly. For instance, stainless steel allows high level of resistance against temperature, chemical, acidity and corrosion. On the other hand, HDPE is lighter in weight but having high tensile strength, anti-chemical, flexible and versatile. Furthermore, fibreglass material is also one of the most preferred in the industry due to its features such as durability, economical, weight, installation and maintenance conveniences and cost.
Production plant contractor Malaysia offers manufacturing line fabrication, including its conveyor system and material processing step system. For instance, ceramic tile manufacturing involves processes such as batching, mixing and grinding, spray drying, forming, drying, glazing, firing. Of course, before finish up the final goods with packaging and shipping, quality control department will kick in and carry out their duty. Quality control flow is the one that needs very high detection system to conduct defect investigation, fine-tune, reproduce if the shortcoming is too far from expected quality. Manufacturing plant contractor Malaysia must ensure the production line system is in good condition at most time, performance optimization so that no loss in average unit cost of production due to the inefficiency in manufacture activity. When manufacturing line efficiency has been boosted, then the per unit costing will be lowered down and subsequently supplier market competitiveness will be elevated. In the nutshell, if the factory manufacturing line has been setup for many years, owner should always appoint a production plant contractor in Malaysia for experienced advice.
Finishing and Packaging
Although it is being mentioned at the last but it is never being the least important too, finishing and packaging is the production’s final stage. This is an important step because it is part of branding that create good impression in front of customer, catching their attention. Most of the manufacturing plant contractor in Malaysia has experience in both automation packaging and manual that operated by manpower.
New Plant Build, Existing Maintenance and Equipment Repair Service in Malaysia
Aathaworld Sdn Bhd can supply many types of custom made fabrication, machinery and factory services for different industries, building material, electrical & electronic, pharmaceutical goods, consumer goods industry, industrial, light and heavy industrial usage, plant and factories, customizable specification to make sure you have the best quality factory and machinery service in Malaysia to fit your requirement. As a plant contractor in Malaysia, we are able to provide customize specification, stainless steel, mild steel, sheet metal, precision metal fabrication, piping fabrication, bolt and nut fabrication, gear fabrication, flanges fabrication, steel plate rolling, welding, turning, boring, drilling, cutting, polishing, fabrication and equipment materials supply for your requirement or projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; besides Malaysia, we are also able to be plant contractor for other countries in Southeast Asia (SEA) such as Singapore, Cambodia, Vietnam, Laos, Myanmar (Burma), Thailand, Indonesia, Philippines, Brunei.
Submit your factory maintenance and material sourcing requirements either you are looking for a plant contractor in KL Kuala Lumpur, Selangor or other states in Malaysia. Enquire your plant service and maintenance Malaysia today, submit your enquiry to us today at firstname.lastname@example.org or call (whatsapp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).
Photo credit: winsun, korean.busbar-machine, sas-automotive, storagehandlingsystems, oregoniron, psfindustries