Aathaworld Sdn Bhd is able to provide warehouse and storage design, fabricate and build, warehouse storage renovation and refurbishment, warehouse storage racking system upgrade and maintenance work, covering KL Kuala Lumpur, Selangor, Klang Valley and other states of Malaysia. As a leading warehouse racking system contractor in Malaysia, that is why we promise to deliver best quality of new warehouse construction, warehouse renovation work and upgrading service in Malaysia. Warehouse racking system requires consistent upgrading work to ensure storage and warehouse efficiency is maximized, including office renovation, the warehouse’s equipment and storage system maintenance. Enquire us today for your storage racking contractor in Malaysia, from warehouse building to mechanical maintenance, repair and upgrading services.
Pallet rack is material storage system that can be used to keep goods secured, manageable and hassle-less in retrieval, distribution when required to do so. The warehousing system normally coupled with forklift or other equipment so that movement of materials can be carried out easily. Multiple rows with proper categorized items will form the whole racking system, racking system can be integrated into the software system provided by the storage racking supplier Malaysia to keep track of each individual stock item.
Storage density, capacity and organization are key to a successful racking system regardless of the industry nature.
The easier each of the process and activity (stock-in, stock-out or any stock-rearrangement), the lower the overall warehousing cost of racking system. Quality racking system supplier in Malaysia can always consult, design and fabricate the storage racking which matches client’s requirement.
Client who seek for advise should always put trust on the system provider by informing the routine operation standard or procedure, including the turnover nature or rate of raw material, semi-finished good and ready stocks. This step is an essential move where it contributes dramatically into the whole proposal design stage, costing and efficiency. Racking system contractor Malaysia normally able to come out with first options in order to let the client choose, because variety of options allow better decision making.
One of the examples of good pallet racking system is selective pallet racking system, it is basically formed by two types, which is structural bolt, clip-in and roll formed configurations. The racking system contractor in Malaysia claims that first system is sharing a high similarities level with rolled form in many aspects; however, in order to ensure better load bearing, horizontal load beam will be attached to the bolts at upright direction. The rack can be readjusted since the bolt fixing type is installed to make sure the shelving setting is configurable, dismantlable and reusable. Furthermore, the upright column will be utilized to take up the roof weight, simultaneously from the storage building structure.
Selective pallet racking system is also well-known in “big-box” distribution system, where retail industry such as seafood (cold storage), consumer goods (shoes) and wholeselling business too.
Racking system fabricator Malaysia says that this inventory system is so convenient that in which it ranked as the top few warehouse method, often the client’s favourite in the most of the industries. It allows high traffic stock movement (frequent stock turnover rate), high accessibility level as well as it can help to reduce error risk in the overall warehousing system.
Another common storage system favoured by business owner is the roll formed selective rack system, according to racking fabricator in Malaysia. It is actually called as the teardrop method, where pallet will be lying on the non-vertical load beam which mounted by clip. The shelves’ height can be adjusted in order to enable multiple pallet size to be fitted in.
Racking System Materials
There are many other types of racking system, but we wish to emphasize on the simple one, the materials of manufacturing the storage rack system. Storage rack supplier in Malaysia capable to fabricate and supply warehouse rack system with different material, such as aluminium, steel, timber and plastic. These varieties have different advantages and depending on the purpose, stock types, operation nature and budget.
Timber is one of the oldest materials in racking system fabrication, due to the reason where timber can be obtained easily and customization can be done by almost everyone in the history. In accordance to material rack contractor Malaysia, from raw timber to cutting, polish, coating to assembly, wooden racking system allows factory or warehouse workers to carry out the make-to-install process without any difficulty since no special equipment setup is needed. Timber is strong and durable if proper structural design, fabrication and protective coating are being done carefully.
Steel racking system is on the other hand, cannot be carried out by ordinary worker since it requires special equipment to process it. Put aside buying different ready-size steel where only welding, assembly and installation are the only steps; steel warehouse rack shall always be manufactured and installed by warehouse racking system specialist in Malaysia, because it involves a lot of design and calculation that affect the safety of the warehouse system.
Last few but not least will be the aluminium, plastic or HDPE type of racking system; these materials are invented and popular to be used because it has the lightweight and cost efficiency feature. Racking system specialist Malaysia supply a lot of these types because it is fast to be produced, easy to be installed due to its weight as well as low material cost. In addition, this type of racking system also sharing the comparable strength and durability with steel and timber rack system.
Where to Get Warehouse Racking System Supplier and Contractor in Malaysia
Aathaworld Sdn Bhd can supply many types of custom made storage racking system, fabrication, machinery and factory services for different industries, building material, electrical & electronic, pharmaceutical goods, consumer goods industry, industrial, light and heavy industrial usage, plant and factories, customizable specification to make sure you have the best quality racking system, factory and machinery service in Malaysia to fit your requirement. As a turnkey warehouse service provider in Malaysia, we are able to provide customize specification storage system, robotic warehousing, automatic warehousing for industrial warehouse, industrial modern racking system, mobile warehousing, mobile racking, retail warehouse, distribution center and storage warehouse. We can process any materials, such as timber, aluminium, HDPE, plastic, stainless steel, mild steel, sheet metal, precision metal fabrication, piping fabrication, bolt and nut fabrication, gear fabrication, flanges fabrication, steel plate rolling, welding, turning, boring, drilling, cutting, polishing, fabrication and equipment materials supply for your requirement or projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; besides Malaysia, we are also able to be factory and warehouse contractor for other countries in Southeast Asia (SEA) such as Singapore, Cambodia, Vietnam, Laos, Myanmar (Burma), Thailand, Indonesia, Philippines, Brunei.
Submit your warehouse racking system purchase, maintenance, upgrading and material sourcing requirements either you are looking for a factory and warehouse contractor in KL Kuala Lumpur, Selangor or other states in Malaysia. Enquire your warehouse storage system design, build, service requirement in Malaysia today, submit your enquiry to us today at firstname.lastname@example.org or call (whatsapp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).
Photo credit: riganelliscaffalature, fimat, eurostorage, metalpipeconnectors, noordrek, youtube, daifuku, cisco-eagle, clearpathrobotics