Sawn wood, timber or lumber are commonly known as the flat sawn which are popular to be used as sawing and it was produced through the first cut, represented by a straight plane or line that makes the point’s curved surface being touched. Most of the sawmills will keep stocks of the simple wood, according to a sawn timber supplier in Malaysia. This is the most efficient way in cost saving for the log to be milled into planks. Parallel cuts can be completed without much waste as well as the efforts involved are easy and quick. The rationale is pretty understandable, as wood planks of plain sawn are having wider spans by default. In the wood-milling market, there are wide range of methods for sawing and the well known one would be the plain sawing, live sawing, quarter sawing, grade sawing and cant sawing. Comparison made between quarter and rift sawn lumber which is also known as radial grain, the first is having special appearance in terms of its linear surface. Sawn timber supplier Malaysia claims that the rift sawn lumber would have a high stability in its dimension while for the rift sawn board, getting forty-five degrees in its annular rings can reach the optimal level for the board's face. Rift sawn lumber consists of pretty straight and direct grain patterning on its narrow surface, this kind can be applied with oak species in order to make flecks avoid since it is commonly observed.
Quarter sawn wood is generally costly compared to other sawn timber as its intensity level for labour usage to produce will be higher, putting aside the fact that it will then subsequently cause more waste than the plain sawn lumber. However, it will have a stabilized grain pattern, making the public keen to use that too even though it might be more expensive. Sawn timber supplier in Malaysia claims that this sawn wood has also other pros in application, such as contraction and expansion are lesser while cupping is less likely to occur too. At the same time, red oak can also have its dramatic flecking in addition to the similar white oak species. The special grain that seems attractive to many designers while appointing carpentry specialists who can make wonders for a lot of products to their projects are reasonably smart choices too. End products that can be used by quarter sawn wood include high-end custom made craft for display, flooring of properties, cabinets, wardrobe and other styles of different furniture. Sawn timber supplier Malaysia explains some myths exist in the wood sector, the differences between tiger oak and quarter sawn oak. It happens to be the same thing for all these ranges of cat’s eye, tiger eye oak, quarter cut or tiger oak. Since quarter cutting to log will expose those rays to flakes or flecks while commonly, known as eyes of tiger or cat. This unique lumber milling process will create a distinctive grain that can be applied for many high-end projects since appearance will be a priority.
There is another woodworking process that a capable sawn timber supplier in Malaysia can produce, is the rift cut oak or rift sawing. This sawing will be conducted strictly to radials of the log whereas the main objective is to make sure lumber will be ending with lesser vulnerability in terms of its distortion than any other sawn lumber, such as the flat one. Technically speaking, it is sawing through the a way following the radials of log raw material, by considering the annular growth ring orientation as perpendicular to its wood grain. Anyhow, this methodology might create a lot of wastes and therefore hike up the lumber’s cost for any special project that requires this sawing. Sawn timber supplier Malaysia sells a lot to customers who use it for flooring, the rift sawn flooring that has no flecking on its linear grain pattern. In Quarter Sawn flooring, the log is first quartered, and then each quarter is cut again into slices. ... Rift sawn flooring is manufactured by milling perpendicular to the log's growth rings producing a linear grain pattern with no flecking. This method produces the most waste, increasing the cost of this lumber and subsequently might make the origin budget burst on paper.
Furthermore, there is another type of saw known as tangent saw that can be done through sawing by regular succession on a parallel cuts basis. Sawn timber supplier in Malaysia also clarifies the through and through sawing that is called as tangential board production method, while many address it as crown or plain sawn too. In terms of cost affordability, air dried lumber will be a wiser option for projects that need to save the budget since kiln dried will be more expensive. Kiln drying is basically the wood will be getting rid of its moisture content in a special built purposeful oven since drying will be carried on after timber was taken for the sawing process. However, many mention that the log will be dried before taken to saw but it might get hardened since moisture content is the element that softens the lumber, making the weight heavier and cutting tougher. Sawn timber supplier Malaysia has some classical thumb rule for lumber to carry out air drying, one year of drying time as per wood thickness (usually by per inch). Those woods applied for carpentry works or floorings will usually be taken for kiln-drying since warping and cupping are less likely to be needed and make the durability of these products higher than air dried. Air drying naturally is an option to go with, when outdoor products are required by projects’ owner. For example outdoor furnitures include floor deck, fence, patio, gazebo, bench and pallet.
Rough cut lumber has been mistaken as a weaker product but it has never been the case since stiffness of strong rough cut lumber is higher and surely suitable for applying to beam, bending as well as together with rafters and joists. Rafter is an internal beam extended to the roof's peak from eaves and acting as framework, in accordance with sawn timber supplier in Malaysia. Joist is on the other hand, a timber part to the building’s structure that is arranged parallel to support the ceiling or floor. From the perspectives of wood or timber conversion, live sawing or we know as through and through sawing is the method that has the highest economical value. Live sawn can incorporate all parts of the log usage, without wastages and environmental friendly. When the priority is stability, radially cut wood products will be expensive but yet produce hardwearing and stable timber. Sawn wood supplier Malaysia shares the concerns that mill might have are the risks of wood grain’s appearance could be affected by board cutting way, incorrect measurement before cut and all these cannot be reversed once done. Of course, there are also potential and common defects that sawmills worry and have to take into consideration. For instance, the natural defects consist of curl, burr, rind galls, crookedness, cross grain, shakes and knots (branches of the tree will have grown on certain parts of the log).
Where to Get Supply of Plain Timber and Sawn Wood or Lumber in Malaysia
Aathaworld can supply your plain lumber, log, sawn wood or custom made wooden items from flooring, pergola, truss, cabinetry, door, beam, awning, louvre, cladding, roofing, panel, column, rafter, furniture, structural component, frame, joist, window,, landscape, hardscape, gazebo or interior and exterior decorative facade. As sawn wood supplier in Malaysia, get wooden products quote from us for your new, repair, craft wood, facade, structure, interior, exterior, upgrading, refurbishment, sculpture and renovation projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia. Many people trust in Malaysia’s wood, those timber species are popular and we are interested to export to other countries in Southeast Asia (SEA) such as Singapore, Myanmar (Burma), Cambodia, Vietnam, Laos, Thailand, Indonesia, Philippines, Brunei, Bangladesh as well as China, Taiwan, Hong Kong, Australia and New Zealand.
Submit your sawn lumber or other wooden block and plank timber products sourcing requirements, either you are looking for a supplier or for your carpentry usage, new or existing building, upgrading or renovation for all range of building materials, industries, construction, property types in KL Kuala Lumpur, Selangor or other states in Malaysia. Submit your wooden materials and more timber sourcing requirements enquiry now to info@aathaworld.com or call (WhatsApp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holidays).
Photo credits: vancouverisawesome, hdrinc, pinterest, virtufloors, petermanlumber, whitneysawmills
Hozzászólások