Scaffolding Supplier Malaysia
Scaffolding is the erection of temporary structure in order to support site worker or the materials during the construction process including infrastructure, building and other types of structures. Scaffolding supplier in Malaysia also call it as staging or scaffold, which they also supply scaffold to contractor who does repair, refurbishment and maintenance of buildings. When scaffold is applied in the construction site, height is no longer a restriction with proper scaffold setup.
In addition to building, scaffolding has been also widely employed in many other forms, such as shorring, formwork, exhibition, artwork, concert stage, viewing tower. There are several types of scaffoldings supported by scaffolding system supplier in Malaysia such as prefabricated scaffold (modular component system), façade or H frame modular, tube and coupler fitting system, as well as other materials such as bamboo and timber scaffolds.
The main component of scaffolding includes base plate or jack that act as load-bearing base for the scaffold, the batten which is the board deck as a platform, joint coupler, horizontal brace (known as ledger), scaffold tie that connect structure from scaffold, cross-sectional bracing component, width extension bracket, transom which is required to hold board, decking or batten units and it is load-bearing lie with horizontal cross-sectional way.
According to scaffold system supplier Malaysia, there is also connector joint’s upright component besides ladder, stair type walkway, heavy duty load bearing transom as well as the beam ladder for the purpose of extending rubbish chutes, obstacle which is applied to eliminate undesirable supplies during the construction, away from the scaffolding.
Scaffold supplier in Malaysia has the full responsibility to ensure the construction working platform is having high level of security and meet best safety guideline, because the scaffolding is created to provide a safe accessible climbable platform for site labour to carry out the construction jobs on-site, such as painting, roofing, plastering, waterproofing or other scopes. Scaffolding supplier Malaysia can do repair and maintenance works for the contractor too which include accessories such as coupler, board or tube.
Scaffolding is used to be made by timber from the ancient, which timber is highly available yet cheap in cost at that time; However, it is not always being the case, frequent deforestation worldwide makes many species of trees diminishing, the useable timber for other industries and products are also getting lesser and cause more expensive. Therefore, scaffolding supplier Malaysia has innovated into different kind of scaffold materials such as steel, bamboo or aluminium and many more.
The basic components of scaffold from scaffolding system supplier in Malaysia are transoms, ledgers, standard. Transom is the one located besides standards and on the ledger, it is sited at this position just to support the board, grasp the standard to ensure the other modules are firmed at the right location. The ledger is those tube lied horizontally, connecting the standards correctly.
Last but not least, the standard (which also known as upright) is tube that vertically positioned to carry out structural mass shifting in the direction of ground base; the base is normally designed in a square shape as a load spread support by scaffold supplier in Malaysia, shank is located at the center of base plate as a tube holder.
Cross bracing enhancement of stiffness can be created when tube placed at the right angle, ledger by ledger placing, diagonally organized well by scaffolding supplier Malaysia.
Scaffolding supplier in Malaysia encourages the use of bamboo scaffolding due to its high resistance against fire and temperature, this is important because construction site might have potential hotness from the machineries or surrounding building materials; it may cause a sudden arising of heat temperature or subsequently, the fire. Scaffolding supplier Malaysia also proves that bamboo’s weight is lighter than many materials including timber, making conveniences in construction and transportation. Elasticity of bamboo is high, which makes it a preferable material when choosing material that can withstand high vibration and dynamic load (as it has premium tensile strength too, since its fiber properties format is in axial arrangement. Other benefits that can be offered by bamboo scaffolding supplier Malaysia such as convenience to be used, cost effectiveness, healthy, recyclable and multi-purpose.
Aluminium by itself cover a lot of features where not all the other types of scaffold can do, it is organically lightweight yet high load bearing capacity. Aluminium scaffolding supplier in Malaysia uses less labour in platform erection, dismantle, which indirectly leads to lower in accident and in term of cost. Furthermore, aluminium scaffold saves transport and fuel cost in addition to crane lifting cost. By using aluminium scaffolding, it also brings speed in assembly, convenience in handling where inexperienced site worker can do the assembly and dismantle with proper guidance.
Scaffolding supplier Malaysia who supply non-aluminium based scaffold has difficulty in preventing work environment from potential damage, but it will be not the case for aluminium scaffold supplier Malaysia. Aluminium scaffolding is also cheaper in cost which makes them more affordable to wide range type of contractors. Aluminium has also minimal maintenance cost due to its properties, lightweight yet tough, especially for Malaysia’s construction site which is humid and most of the foreign workers might not able to take a good care on the building materials during construction stage.
Steel scaffold supplier Malaysia is growing at a very fast pace, and it is a very wide accepted common material that many contractors will opt to use it. It has a stable structural strength that can withstand extremely high load, pressure, adverse weather and environment as good as earthquake-resistant (although it is less likely to be happened in Malaysia). In term of durability and workability, contractor also agree that the steel has very high value in properties. Steel scaffolding supplier in Malaysia is also recognized as semi-green building materials provider because steel has thousands of recyclability and it is definitely a material that is able achieve zero wastage. Regardless of weather, chemical, insects or temperature until manmade damage, steel has longest lifespan and strength that you need.
Builder in construction industry would agree that timber, a popular building material and decorative element that have been existed for the past thousand years. Its application as scaffold is also as long as the human starts to build structure higher than conventional height that they can reach. Timber scaffolding supplier in Malaysia uses few features from this natural material as a selling point to the players in the construction, this inclusive of non-toxic, easy handling, recyclable, reusable, cost effectiveness, high availability and versatile. Wooden scaffolding is definitely a good beginning for contractor who has low budget and wish to start and try.
Where to Buy Scaffolding and Get Scaffolding Contractor in Malaysia
Aathaworld Sdn Bhd supply and install multiple cost saving scaffolding that can be used for interior and exterior, indoor and outdoor, light and heavy industrial usage, customizable specification for commercial, residential, high-rise, industrial, plant, factory, mass housing, precast, prefab IBS, HDPE scaffolding, hybrid scaffolding system, infrastructure scaffolding system, modular scaffolding system, building scaffolding, scaffold frame, second hand scaffolding, mobile scaffolding.
As a scaffolding supplier, installer (contractor) in Malaysia, we are able to provide a full service design consultancy, customize supply and install for your project covering new, repair, refurbishment and renovation projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; of course, also we are able to be scaffolding supplier and scaffolding contractor for other countries in Southeast Asia (SEA) such as Singapore, Cambodia, Vietnam, Laos, Myanmar (Burma), Thailand, Indonesia, Philippines, Brunei.
Submit your scaffolding materials projects sourcing requirements (supply and install), either you are looking for a scaffolding supplier or scaffolding installer for new or existing scaffolding replacement, scaffolding repair and maintenance, contact us for scaffolding system in KL Kuala Lumpur, Selangor or other states in Malaysia. Submit your enquiry to us today at firstname.lastname@example.org or call (whatsapp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).
Photo credit: brogangroup, nwsafetyconsulting, ask-ehs, rollsscaffold, guiadoconstrutor, local79, chapplescaffolding, layherna, brokensidewalk, westernspecialtycontractors, youtube, blog.oasismetal, 360degreeglobal, peri, ulmaconstruction