Aathaworld Sdn Bhd has been in steel industries for quite some time and we are proud to say we are one of the top steel supplier and fabricator in Malaysia who can do steel contracting and engineering in nearly perfect quality work. Steel is one of the major material in construction and also one of the most recycled material in the world due to its characteristic of do not breakdown or degrade after smelting and remolding. Its common usage is to make steel rebar which is an important material to do reinforce concrete. Other steel products such as scaffolding, framework, pipe, bolt and nuts, metal roof, generator set cover, furniture and many many more. To ensure our best quality of product and works, we are also providing service as a contractor and engineer to carry out installation and maintenance for your works. Our aim is to be a leading steel supplier and fabricator in Malaysia who is able to deliver the best quality of steel products the entire region of West Malaysia especially KL Kuala Lumpur, Selangor, Klang Valley, and Putrajaya.
Steel Rebar Steel rebar is an important metal for many concrete works. This is because by using concrete alone would only able to provide good compressive strength which is a solid and difficult change in shape. However, using concrete alone suffer a major problem which is easy to crack because of its weakness against vibration. The result of cracks are obvious, a crack will allow water to flow in and structural integrity will be jeopardized. In order to reduce the vibration of the concrete structure steel rebar and other relate steel product is add in to counter the vibration issue. Steel is a strong material that able withstand vibration and suffers damage from little to none. By using steel alone is not ideal as well because steel is naturally not corrosion resistance. Exposed to weather will surely result in degrading of its performance. So that's why reinforced concrete is being implemented. Reinforced concrete has good compressive strength and as well as tensile strength. It is more than just reducing cracks but able to extend the lifetime of the product. Steel rebar is easy to bend by using a simple machine so its usage is very versatile. Since its widely use in concrete works so not much coating or waterproof need to be done on it. Aathaworld Sdn Bhd steel manufacture able to supply steel rebar in a huge amount to fulfill your demand so quantity for us will never be an issue.
Scaffolding Scaffolding is another important steel product in the construction industry. Its usage is to act as a temporary structure to support a work crew and materials to assist in the construction, maintenance, and repair of the structure. It is widely rent out to many infrastructures projects such as flyover or overpass bridge and other ongoing construct building as well. Supplying scaffolding to project are sometimes not enough because installing scaffolding or using it on big or tall structure requires intensive calculation and drawing because a mistake will be a waste of money and waste of time. Scaffolding has many of type of different usages such as tubular type, modular, steel frame and etc. All this requirement are usually handled by scaffolding architect to do the drawing and calculation so that all the engineering work can be carried out smoothly. Preparation is everything which is why Aathaworld Sdn Bhd is providing this service as well so that we can carry out the work in the best quality form and complete in a much more efficient way.
Mild steel Mild steel is one of the alloy series where an alloy is a mixture result of both metal and non-metal, pure metal cannot be having all properties that are required and hence additive elements must be added appropriately to ensure specific characteristics can be obtained. For instance, ductility, tensile and hardness are aspects of metal in which mild steel supplier in Malaysia expects to achieve through element and carbon add-on. There are so many types of elements can be added, with a little bit of carbon content, properties can be altered on the mild steel. The practical theory works in a way according to mild steel product supplier Malaysia, there are tiny gaps among iron lattices; carbon atoms that are space-attached make a harder and stronger yet compromising on its ductility. Mild steel supplier in Malaysia can supply easily approximate 210 thousand Mpa (unit of measurement for modulus of elasticity) grade level for industry usage, the average density is estimated at roughly seven thousand eight hundred and sixty kilograms per meter cube. Mild steel can be welded effortlessly by a mild steel fabricator in Malaysia because of its inordinate electricity conductivity. Not only being applied to the automotive industry as vehicle body and part, but mild steel is also used widely for building as structural steel by a contractor. In addition to that, mild steel is also being utilized for other building materials such as piping, accessories since it has high malleability. Mild steel supplier Malaysia can do the machining at a relatively easy and effortless method on drilling, shaper, milling and lathe machines. Mild steel can be easily machined in the lathe, shaper, drilling or milling machine; its hardness can be increased by the application of carbon. Mild steel products are magnetized easily due to its ferromagnetic properties where most of the electrical devices are made up of mild steel. Mild steel supplier Malaysia also does advise users if they would like to go for rust-free can opt stainless steel rather than mild steel because the latter contains relatively high carbon amount.
Where to Buy Steel Products in Malaysia Aathaworld Sdn Bhd can supply many types of steel used for indoor and outdoor, construction, pharmaceutical, engineering, oil and gas (O&G), marine, food and beverage, industrial, light and heavy industrial usage, decorative façade, customizable specification to make sure you have the best quality steel supply in Malaysia to fit your requirement including tank, pipe, bearing, bar, fittings, rod, flanges, elbow, tube, and many other types.
As a steel supplier in Malaysia, we are able to provide customize specification, cutting and fabrication (if needed) supply for your requirement or projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; besides Malaysia, we are also able to be steel supplier and fabricator for other countries in Southeast Asia (SEA) such as Cambodia, Singapore, Vietnam, Laos, Myanmar (Burma), Thailand, Indonesia, Philippines, Brunei. Submit your steel requirements either you are looking for a steel building material supplier or engineer in Selangor, KL Kuala Lumpur or any other states in Malaysia. Purchase your steel product Malaysia today, submit your inquiry to us today at email@example.com or call (WhatsApp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).
Photo credit: beautyharmonylife, kjtubing, metalsupplies, brogangroup, taemyungsteel