Tile Grout Supplier Malaysia | Construction Chemical


Tile Grout Contractor Malaysia

Aathaworld can supply grout for your gap filling, bonding agent and as reinforcement of existing structure. Tile grout is undoubtedly one of the grouting systems that contractors will apply to install tile in their project, regardless of what type of tiles is to be used. Tile grout supplier in Malaysia does service a lot of tilers who install various kinds of tiles, and porcelain is the most durable tile that still requires grout. Porcelain tile is well known in its durability in comparison to many other tiles range, toughness, density and hardness are also superior too. Furthermore, its porousity is lesser than its peers too, including ceramic tile. Prolonged exposure might not be able to cause much effect since its impervious against water damage is virtually good, the absorption rate is reasonably low. The porcelain tile is denser and therefore the weight is also heavier, making it sometimes a little bit pricier than other tiles. The rate of water absorption rate is lesser than zero point five percent for porcelain tile, the vitrified porcelain tile can achieve stronger in this feature according to tile grout supplier Malaysia. Upon vitrification of porcelain tile, the porousity can be further reduced while its strength can be enhanced more.


Vitrification is the word derived from Latin as well as via French too, it involves the clay combining with few more materials including silica, quartz, feldspar or some elements through processes of extremely high temperature. Vitrification procedure is a very standardized common method to treat the ceramic product manufacturing as substrate, as to make it impermeable to water by having substance transformation to glass. Tile grout supplier in Malaysia says that the glass substrate enables the existence of sleek surfacing in terms of appearance as well as resistant to scratch besides strengthening and water-resistance. Having said that, there is no longer needed to reglaze and reseal the porcelain tile upon the proceeds of vitrifying or so called glasslike substance. Epoxy grout is the type that will be applied on porcelain tile, whereas this is much better than other classical grout while it can still be installed using the identical method as per ordinary materials of grouts. Epoxy grout has a reasonable setting and curing time, although these are also more or less depending upon the temperature, moisture content and other factors of the ambient. However, many of the epoxy or tile grout materials packaging will only show their setting time on the labelling. Tile grout supplier Malaysia finds the possibility of curing time can be kept within one full day (24 hours) or up to three days (72 hours).

Tile Grout Malaysia

The average temperature of the environment is typically measured at approximately twenty-plus celcius, some can up to more than thirty-plus if exposed to sunlight or it is an outdoor tiling work. Epoxy grout generally would not shrink, discolour or crack and optimal option for certain areas that need highly durable products, such as for heavy traffic flow, floors and other outdoor site locations. Majority of applications for exterior places are encouraged to use sanded and epoxy based grouts since the capabilities to withstand the variation of temperatures due to fluctuation must be there in addition to water resistance. Tile grout supplier in Malaysia can offers a consistent quality of grouting system that can support the possible stress that could happen when placed outdoors. Outdoor setting makes the grout exposed to extreme weathering from raining, sunny day, potential flood which indirectly translate into huge ambient temperature, expansion and contraction of flooring materials will definitely occur. Smaller joints are advised to go for unsanded type of grout since the sanded grout is designed for joints that have 0.125 inch or more. There is also another type of outdoor grout, namely the cement-based grout; a mixture of sand, cement, water where it is usually used in pressure grouting. Tile grout supplier Malaysia says this kind of grout will be applied to fill up voids, masonry walls’ rebar embedding, precast concrete section-connecting as well as joint sealing between tiles.

Cement-Based Grout Malaysia

There are many benefits and challenges of using cement grout, and the first two are consisting of workability and convenience to be used. Manpower to install tile grout or for other purposes can be fresh and new in which its user-friendliness allows any Do-It-Yourself (DIY) consumers to buy and apply on their own. Since the width of joints can be varied based on design, type of tiles or other conditions, cement-based grout has a winning point that makes it superior, working perfectly to any range of the width in actual situations. Tile grout supplier in Malaysia also says that the set up to use this cement grout is relatively easy, can learn from video provided by respective brands online or just refer to the procedures stated in the method statement provided by grout manufacturers. Salesmen or technical support of every merchant will be more than willing to offer their best SOP (Standard-of-Procedure) guidelines to customers, some of them might even do a mock-up for contractors to learn at the site, factory or any showroom. From the aspect of affordability, cement grout can be very price-competitive to be specified, saving up a lot of unnecessary costs to the project developers, contractors so that they can allocate the budget to other building materials for the building.


Nevertheless, cement grout allows the completed sealing to prevent the intr