Aathaworld is a ceramic coating contractor in Malaysia, supply and apply ceramic coating that cover KL Kuala Lumpur, Selangor, Klang Valley and other states. In addition to ceramic coating, we can also supply and install other flooring materials such as epoxy, polyurethane (PU) and other resin flooring. Flooring is an important part of every buildings and room types, including the external that exposed to sunlight, rainwater as well as internal one that exposed to chemicals or heavy load. There are several types of floor can be used on interior and exterior and we will share more to you on the advantages and disadvantages in comparison with ceramic coating. Flooring is defined as permanent covering (at least medium to long term), of a floor, also known as floor covering. Any finishing materials on top of the floor structure are applied in order to produce the walkable surface, however, both flooring and floor covering terms are interchangeable. Ceramic floor coating contractor Malaysia is also known as the coloured epoxy flake floor system specialist in Malaysia. This kind of flooring can achieve advantages in few aspects, including the aesthetic surface that please tenants and visitors, easy to clean, durable, resistant to chemicals and more. Comparing it to other floor materials, it stands out among them because of these key features where not all flooring has it; designer in the industry also address it as designer floor because it involves effort to specify the colour, pattern after consideration of other interior and engineering aspects in the room or building.
Seamless Polymer Flooring
Ceramic floor coating contractor in Malaysia is capable to supply and apply this special finishes on any floor surface after proper modification or treatment was completed. There are several seamless flooring types that are different, from the aspect of air drying latex emulsion thermoset resins such as, solvent-free or solvented urethanes, epoxy, polyaspartics and waterborne. These application materials are normally presented in a liquid form, all are cured and dried in order to provide seamless floor covering at a complete way. Ceramic floor coating contractor Malaysia is also capable to do the simple floor covering just to protect the in house car park floor, up to the extent for industrial and commercial usage. They are doing the upkeep and upgrading works for heavy industries, food and beverage, car showroom, offices and more. These are being installed in several other industries for the sake of solving their issues, including food processing factory and laboratories’ wet floors. Ceramic floor coating contractor in Malaysia can advise according to the plant’s requirement; in which they normally can comply to the safety standards. Those specialists in flooring also claims that the spillage of these fats or oils are usually not easy to be cleaned and ordinary floor that didn’t receive any special treatment will absorb these elements certainly too.
Synthetic resin flooring is required on top of concrete substrate is because they are used to enhance the chemical resistance level of the floor as well as against wear and tear, unexpected impact in addition to appealing outlook. Seamless flooring system can be presented in multiple forms, such as high-build, broadcast with aggregates, ordinary floor seals, heavy duty flow applied or trowel finished with resin screeding, self-level cum self-smoothing and so on. Typical thickness ranges from 2mm to 6mm and it can be lesser or more than this range, according to ceramic floor coating contractor Malaysia. The flooring types mentioned mostly can achieve the slip resistance effect in which traction control can be there on the steps and walkways, it is very good to the area which always have frequent washing, high level of traffic flow and slope pathway that has high tendency to make road users to fall down. Therefore, shared common facilities and other areas such as park, public museum, school’s corridors shall use these coatings for safety purposes.
Coloured Epoxy Flake Floor System
Epoxy is a common floor coating that always suggested by coloured epoxy flake floor system contractor in Malaysia, either an ordinary epoxy coating or the hardwearing type to withstand heavy duty for industrial processing plant such as palm oil mill, power plant, oil and gas as well as others. Commercial building also put on epoxy so that it can achieve smooth, high-performance and long-lasting surface up to decades. The good example for commercial use is the car showroom, warehouses and so forth. After the floor being coated with epoxy, it can increase the level of safety and cleanliness for equipment, goods as well as workers who are the most important and benefits the most in the application in accordance to coloured epoxy flake floor system contractor Malaysia. There are several steps to be done before epoxy floor was being coated; first, the cleaning must be done to ensure no dirt and dust on it. Second, the holes, crack line must be patched up and filled up in addition to the grease removal. The concrete shall be cured completely and old concrete floor needs a test of previous coating, and sealant can be examined through water pouring onto the floor (it should soak into the floor). Furthermore, coloured epoxy flake floor system contractor in Malaysia will advise to check on the temperature of the ambient, floor and humidity of surrounding. There is a risk where epoxy will peel off after bubble was formed, application shall be done as quick as possible right after the mixing of two-parts system, before it gets harden after exposed to the air.