Aathaworld Sdn Bhd supply customize foam for residential, commercial and industrial, according to different foam material and design requirement by consumers. We are foam supplier who covers Kuala Lumpur KL, Selangor, Klang Valley and other states of Malaysia. As a foam supplier in Malaysia, we wish to share with you more on the foam as this is one of the most significant materials when it comes to insulation (acting as heat and sound barrier). Foam can be in many kinds of shape, pattern, thickness and size; foam supplier Malaysia can definitely produce in accordance to the requirement.
Foam is actually a kind of material that is formed through gas pocket trapping in the form of solid or liquid, a very good example is the bath sponge alike foam on top of drink. The gas volume in foam is large usually and one thin layer of solid or liquid film isolating the gas cover. However, foam supplier in Malaysia we mean here is the polystyrene foam that is being used in construction, engineering and industrial. Of course, some foam also being sold to packaging in which wide range of industries require this type of polystyrene foam packaging material to protect their goods.
What is Polystyrene
Polystyrene is a synthetic polymer in which its density can be adjusted according to requirement, this aromatic hydrocarbon material can be inelastic, tough and clear. Its porousity allows water vapour and oxygen go through instead of acting as a barrier, polystyrene supplier Malaysia can also adjust its porousity in order to fit the needs. Polystyrene is also classified as one of most common to use plastic products where few million tonnes production is happening annually. Although polystyrene can be transparent, but coloured polystyrene is also possible for decorative purpose. However, the most popular polystyrene colour is actually white, it is also an inexpensive resin material and hence widely used by various industries.
According to polystyrene supplier in Malaysia, polystyrene will be at solid state when it is placed in an area with room temperature as a thermoplastic polymer, but its glassy form will change when it is being heated up to above 100 celcius. However, rigidity will be reformed back after cooling down. Foam can be made into a solid material where it can have high density but yet high strength, therefore, it is highly suitable to be used as a lightweight building and industrial materials. Polystyrene supplier Malaysia is able to produce the cellular engineering materials that can have high mechanical properties, generally divided into two major types which are closed cell and open cell foam (might also be called as reticulated foam); the categorization is based on pore structure.
Closed Cell Foam
Closed cell foam normally is having better compressive strength structure since it is having higher density. Although closed-cell foam does not have pores that is interconnecting, but since the level of density makes this type of foam needs more material to produce. This foam can also be further processed into expanded polystyrene (EPS). EPS supplier in Malaysia can also make the closed-cell structural foam to have very good stability dimensionally; besides that, the closed cell will be filled up with specialized gas for insulation purpose. Compared to open cell foam, closed cell foam performs better in term of strength and moisture resistant. EPS supplier Malaysia does receive many orders from contractor who is including foam into the concrete either by complete mixing or sandwich panel together with concrete to achieve insulated panel where heat and sound barrier value are required.
Open Cell Foam
Open cell structure foam is another type that is having interconnecting pores, open cell foam will fill up any surrounding gas since any air-filled foam will achieve certain level of insulating properties. However, EPS supplier in Malaysia also advise not to fill up with any water because the insulation feature will be affected. Historical data shows that the early stage of cellular solid used in engineering is timber where after being dried, the closed cell foam will be consisting of air, cellulose and lignin. Began from the 20th century, most of the different kinds of solid foams have been commercialized, widely accepted and utilized by the industries. EPS Supplier Malaysia claims that not only high density foam can perform in thermal insulation, low density foam does play the role relatively well too; many applications are coming from making them as a packaging material.
Usage of Foam
Expanded polystyrene (EPS) is relatively common to be used in many countries now for concrete sandwich panel, either as a wall, roof or floor panel. Styrofoam supplier in Malaysia can produce in the foams, from pure origin EPS (in which this form you can have flexibility in application), expanded polystyrene with high tensile BRC wiremesh (in this form, you can apply as structural load-bearing wall where concrete layer can be sprayed on both sides during installation). Nevertheless, some order from contractors might require foam manufacturer to produce ready to use wall, floor or roof panel products. Styrofoam supplier Malaysia can also supply the sandwich panel ready by having gypsum board or concrete layer adhered on to it, they can also produce in a way where cement, aggregate, foam or other special additives to be mixed together.
By getting polystyrene included into any wall, roof, slab (also act as ceiling) will have superior effect in term heat and sound insulation; therefore, these infills are highly suitable to be installed for building such as cinema, hotel, church, bungalow, offices and many more building types where privacy and comfortability are necessary. Although polystyrene is lightweight but can be strengthened through appropriate load-bearing material reinforcement; Also due to the light weight feature, styrofoam supplier in Malaysia is also supplying to the various industries where lightweight packaging material is required. Lighweight feature will save a lot of foundation cost incurred for building, and also saving cost when it comes to transportation (besides it can protect the fragile material, indirectly reducing the risky cost due to damaged stock). Styrofoam supplier Malaysia can cut to size according to the material order design requirement for different customers and projects.
Where to Buy Custom Made Polystyrene Foam Material in Malaysia
Aathaworld Sdn Bhd supply different types of environmental friendly insulation lightweight material for residential, industrial and commercial building, from retail packaging, food & beverage, construction’s wall, roof, slab, ceiling insulation materials, load-bearing structural infill, façade to infrastructure aggregate (geofill, bridge, road), customizable specification such as colours, sizes, pattern and shapes to make sure you have a satisfied quality of foam materials supply and install in Malaysia to fit your requirement. As an foam supplier in Malaysia, we are able to provide polystyrene foam material supply for your requirement or projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; besides Malaysia, we are also able to be styrofoam supplier for other countries in Southeast Asia (SEA) such as Singapore, Cambodia, Vietnam, Laos, Myanmar (Burma), Thailand, Indonesia, Philippines, Brunei.
Submit your foam materials sourcing requirements either you are looking for a foam, Styrofoam, polystyrene foam, expanded polystyrene (EPS) supplier in KL Kuala Lumpur, Selangor or other states in Malaysia. Purchase your polystyrene material Malaysia for your roof today, submit your enquiry to us today at firstname.lastname@example.org or call (whatsapp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).
Photo credit: kz.all, polymoldingllc, mdmodeling, ru.all, designingbuildings, insulfoam, sandwichpanel, lavenetaforme, tiltwall, pinterest, geocell-schaumglas, interestingengineering