Glass & Aluminium Contractor Malaysia | Facade & Cladding


Glass Contractor Malaysia

Glass and aluminium are both materials that come side-by-side just like cladding and facade for the exterior of the building. In order not to mess up the whole thing, we must manage carefully since these are not general specializations that every installer or contractor can do a good job. The glass facade contractor in Malaysia does not always have to be in the fabrication line, they can actually grab the materials from other producers in order to focus their efforts and resources into their installation part. This is essential as aluminium and glass are interrelated and some aluminium manufacturers are not the ones who make glass, vice versa too for the glass parts. In the meantime, we have two major considerations as far as facade and cladding are concerned. First, the facade is not necessarily made by these aluminium and glass specialists, while not all are also made out of these two items too. A glass cladding contractor in Malaysia claims that many people nowadays have worries about the glass’s fragility as they do not want to risk their employees as well as the customers when they pass by too. Cladding is also a vague component where more and more people are keen to explore alternative materials as a substitution.

Glass And Aluminum Malaysia

For the sake of productive facade production, there are more pros and cons when you are buying from certain brands or some factories that produce materials that are sufficient to support your projects. Better get these things from a reputable brand as in their years of experience, track records and portfolios. Based on an aluminium facade contractor in Malaysia who has tried and errored before in their previous jobs, when the supply chain has some sort of interruption, many vendors will have to be obtained for sufficient supplies from them too. Under these circumstances, risky conditions might occur, because not every product complies and is able to be compatible with each other. Mixing around could create a mess up and product warranty by manufacturers will be harder to be granted, risk the project site indirectly. While it is also not possible ideally that, multiple brand owners can allow that to happen as these might put them in an inferior position in terms of liability. Aluminium cladding contractor in Malaysia does face similar challenges too when they are carrying out those projects. The best and identical solution would only be applying the homogeneous materials that are originated from the same factory, so no one bears the downside of all these since it might make the situation worse.

Wall Facade Malaysia

Aluminium is the preferred material for most of the materials specified in projects that have got components such as facade and cladding. Of course, there are also items that have been using aluminium, including the ceiling, louvres and panel. Glass facade contractor Malaysia is very familiar with these too since when there are exteriors to operate, the facade that is made up of glass and aluminium will be very common to be seen. Generally speaking, residential, commercial and industrial are all types of buildings that can utilize, with high suitability as well as an affordable option too. Its versatility is also awesome to have existed. More and more unique designs can be created with the advancement in technology. Therefore, it is good to pay some attention to resources invested in glass and aluminium as building materials. Moreover, glass cladding contractor Malaysia is able to support multiple ranges of glass categories, such as tempered glass, laminated glass as well as more. Polycarbonate, acrylic or any composite one is also a good substitutable one for customers to select. It would be very useful to employ a consultant to advise on what is supposed to be done for the sake of good results.

Aluminum Cladding Malaysia

Where to Source Aluminium and Glass Products with Installation in Malaysia

Aathaworld Sdn Bhd can works on aluminium and glass products and other associated custom made fabrication for consumer goods, indoor and outdoor, light and heavy industrial usage, plant and factories, construction, industrial, roofing, decorative façade, engineering or marine, composite panel (or aluminium composite panel, ACP), customizable specification to make sure you have the best quality supply. Aluminium facade contractor Malaysia can also supply and install for another category of product, whereas people usually call them as siblings. We can also offer the range of glass such as clear glass, frosted glass, heat strengthen glass, annealed glass, toughened glass,fully tempered glass, insulated glass, low-iron (or known as extra clear glass, special surface coated, decorative glass, laminated glass. Not only that, we can also provide louvre windows, glass door, glass window, retractable glass window, glass canopy, smart glass window, adjustable louvered glass for pergola, glass roof, glass awings, glass mirror, louvre glass vent, glass shelter, glass partition, glass ceiling, glass façade, louvre glass cladding, sun glass louvre, shutter glass louvre railing, louvre glass door gate, any glass panel (vertical and horizontal with many shapes). Fundamental works such as installing the door and window, grille and partition that are basically framed aluminium with glass panel. As a aluminium cladding contractor Malaysia, we are able to provide customize aluminium design, consulting, aluminium installation works, aluminium fabrication and maintenance such as welding, turning, boring, refurbishing, cutting, powder coating, drilling, polishing for all your projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia. We can also be your vendors for projects from other countries especially Southeast Asia (SEA) such as Singapore, Myanmar (Burma), Cambodia, Vietnam, Laos, Thailand, Indonesia, Philippines, Brunei, Bangladesh as well as China, Taiwan, Hong Kong, Australia and New Zealand. As a design, supply and build aluminium glass contractor in Malaysia, we can assist your projects from small to large in areas such as residential, oil and gas, marine, infrastructure, power plant, commercial buildings, factory, home renovation, office, showroom, warehouse, industrial, shoplot, decorative purpose, office refurbishment. Consult us for your aluminium or glass material design, custom made supply and build in Malaysia and other regions today at info@aathaworld.com or call (WhatsApp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).

Aluminium Composite Panel Malaysia

Photo credits: Media from Wix


Recent Posts
View by category
Search By Tags