Plywood is one of the types of tough wooden board that is thin enough to support multiple types of loads and usage, it might consist few layers of wood veneers that glued and pressed together with the wood grain’s alternative direction. The standard and most common size of plywood cutting is 4 feet by 8 feet (4’x8’). Most of the plywood supplier in Malaysia agree and classified this engineered wood as the same root family with particle board and Medium-Density Fibreboard (MDF).
The reason why plywood’s cross grain is because it can help to reduce expansion, shinkrage, consistent strength at all direction since it is now dimensionally stable; In addition, when edges are being nailed, the chance of the plywood splits is lowered down and it is proven by many plywood supplier Malaysia.
Layer of the plies glued together normally come in “odd” number because it can help to reduce warping since it is balanced up. The rationale behind this is because of bonded plywood with alternating grains, it reduces the possibility of bending it vertically since the plywood supplier in Malaysia commonly is making the composite parts in odd number.
Advantages of Plywood
Ordinary plywood supplier in Malaysia can supply very high strength wood and the fact is strength along the grain is much stronger than across the grain by at least twenty-five to fourty-five times. However, as per above mentioned, adjacent sheet cross overlapping can have equalized strength at multiple directions.
Solid wood especially plywood in Malaysia, able to get you free from swell, crook and shrink, the justification act in this way where stress can be equalized with adjacent grain routes due to right angles of plywood veneers. Further chemical coating and treatment can also be done, such as enhance the fire retardant, fire-pressure and moisture resistant by plywood supplier in Malaysia upon specified requirement.
Common Plywood in Malaysia
2ft x 4ft plywood or 4ft x 8ft plywood are common sizes that can be found in Malaysia, but it could also be sold in larger sizes by joining or original cutting such as 6ft x 25ft, 6ft x 40ft as well as possible size like 6ft x 3ft. Normally plywood supplier in Malaysia can do many ply (layers or also known as thickness), 3-ply, 5-ply, 7-ply, 9-ply as well as 3mm, 6mm, 9mm, 12mm, 18mm, 25mm and others; it depends on the requirement, grade, wood type and many more.
The most common plywood stocks that plywood supplier in Malaysia sell can ranges from Water and Boil Proof (WBP), Tego WBP, Tropical wood, seven star, BBCC, marine plywood which comply to British Standard, BS 1088, normal grade as well as plywood flush door 30" x 81" and plywood flush door 27" x 81".
Types of Plywood in Malaysia
There are several types of wood can be further processed into plywood, which plywood supplier Malaysia can do are softwood, hardwood, flexible wood, aircraft wood, tropical wood, decorative wood and marine wood.
Cedar that makes for softwood type of plywood in Malaysia are normally applied for construction roofing, as a base as well as acting as tongue and groove for flooring purpose. The hardwood plywood are widely applied in structural and heavy-duty usage floor as its strength in term of impact, shear and stiffness are excellent; furthermore, it is also resistant to damage, creep, cracking, breaking, wear and tear.
The next type of plywood we are introducing is the tropical plywood in Malaysia, the tropical plywood supplier in Malaysia able to provide cost effective, high quality with multiple species since the origins mostly are from Malaysian or other Asian countries. High density, layers’ evenness and strength are the benefits of this type of tropical plywood which the users are looking for, the tropical plywood supplier Malaysia do well in this supply and most of them are exporting to many other countries.
There are also other types of decorative plywood (overlaid plywood) in Malaysia, made by hardwood type such as red oak, maple, birch, rosewood, teak, mahogany, ash, oak, meranti, multi-ply plywood, blockboard, moisture-resistant MDF, fiberboard, particleboard, moisture-resistant particleboard, veneered particleboard, hardboard and many more. Flexible plywood, douglas fir plywood, marine plywood and aircraft plywood can be decorative enough to fall under this category. Get consultation from the plywood supplier in Malaysia to check whether they can supply those plywood that you required for your construction, industrial or decorative purposes.
Where to Buy Plywood Supply in Malaysia
Aathaworld Sdn Bhd can supply and install (as plywood contractor) many species or types of plywood and timber use for indoor and outdoor, construction, light and heavy industrial usage, decorative wood façade, customizable specification to make sure you have the best quality plywood supply in Malaysia to fit your requirement.
As a plywood supplier in Malaysia, we are able to provide customize specification, cutting and fabrication (if needed) supply for your requirement or projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; besides Malaysia, we are also able to be plywood supplier for other countries in Southeast Asia (SEA) such as Singapore, Cambodia, Vietnam, Laos, Myanmar (Burma), Thailand, Indonesia, Philippines, Brunei.
Submit your plywood sourcing requirements either you are looking for a plywood building material supplier in KL Kuala Lumpur, Selangor or other states in Malaysia. Purchase your plywood product Malaysia today, submit your enquiry to us today at info@aathaworld.com or call (whatsapp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).
Photo credit: diynetwork, wisaplywood, homelane, airexbaltekbanova, kwalityply, popularwoodworking, pinterest, woodworkingformeremortals, instructables, lumberjocks, archello, architectureanddesign, trendhunter, home-designing
